Categories
General

What exactly is caviar?

caviar supplier in London, said the price on the legal market for one variety of black roe produced near Khabarovsk could be as much as $400 per kilo. At that price the smuggled haul could be worth as much as $200,000.
MOSCOW — A speeding hearse pulled over by Russian police was found with more than half-a-ton of illegal black caviar stashed in the coffin it was carrying
“I don’t think it’s logistically impossible. You’d need a factory,” Rohgar said. “All it can be is that they’ve raided some warehouse.
The black market in caviar has shrunk since its heyday a decade ago, when it was compared to the drugs trade, and much of the poaching that threatened the extinction of the sturgeon has now been stamped out. Yet smuggling continues, with Russian police in the far east periodically seizing lorry-loads of caviar.
Russia’s undertaker industry is also not known for its transparency. Officials estimate as much as 60 percent of burials are done by unlicensed and amateur undertakers, who sometimes bribe ambulance workers to give them a head start on reaching the deceased]]>

Categories
General

How To Cook Mahi Mahi: The Best, Simplest Method

Buying Mahi Mahi
Mahi mahi, also known as dolphinfish, is usually sold as skinless fillets and is generally considered a sustainable seafood from the Monterey Bay Aquarium’s Seafood Watch list. If you can’t find it fresh, check the frozen seafood section, which may sell them as individually frozen fillets (Costco sells a 3-pound pack of frozen fillets). If you can’t find mahi mahi, look for a meaty white fish like swordfish, halibut, or snapper as an alternative
How to Cook Mahi Mahi
To cook mahi mahi on the stovetop, start with a nonstick or cast iron pan so that there’s less of a chance for the fish to stick. Here are some tips once you’re ready to get going
Use a hot pan and dry fish
To get that nice brown crust on the mahi mahi, make sure the pan is just starting to smoke and the fish has been patted dry with paper towels to remove excess moisture before you add it to the pan
Sear more on the first side
Borrowing from a technique we use with pan-seared salmon, let the first side cook longer to develop the crust, then flip the fish over and cook the second side for just a few minutes more
Use lemon slices and lemon juice
After the fish is cooked, add some lemon juice, garlic, and salt and scrape up those tasty browned bits from the bottom of the pan. Then add some lemon slices both for flavor and a pretty presentation at the end
Finish with butter and parsley
Finish the sauce with butter, but leave it on the heat just until the butter is melted — don’t keep cooking the sauce. Stir in parsley for some freshness and color, then pour that gorgeous sauce over the fish
Serving Mahi Mahi
The simple sauce is so flavorful that the mahi mahi doesn’t need much else, but no one would argue if you served the fish with something that can soak it all up: some crusty bread, steamed rice, or mashed potatoes are all great candidates. It’s up to you if you want to eat the lemon slices — they get soft in the pan and offer a nice contrast to the flaky fish and buttery sauce. A green vegetable, such as asparagus or green beans, also pairs delightfully]]>

Categories
General

HOW TO garlic fish IT’S EASIER THAN YOU THINK!

Grilled fish is one of the healthiest and most delicious foods you can prepare for yourself. Unfortunately, fish is notoriously difficult to grill.

That’s why we’re here to help. If you love fish, but are apprehensive about putting it on your grill, don’t worry, we’re going to make it easy.

HOW TO COOK FISH ON THE GRILL – PREPARATION

The first step when grilling anything, especially fish, is to preheat your grill on high. This does a number of things. Bringing the grill up to temperature will help in caramelizing the fish and provide the defined grill marks that supply the immense flavor all grillers love.

Having the grill preheated will also lessen the amount of time your garlic fish is on the grill, resulting in less opportunity for your fish to dry out. Lastly, preheating the grill will prevent the number one fear for fish grillers…sticking.

Even though fish is very lean, it will naturally release itself from the cooking grate when it is finished cooking if the grill was preheated correctly.

Another constant when it comes to grilling fish is the temperature. Whether skin is on or off, the temperature should be at a medium to high heat, depending on the recipe, around 400-450 degrees Fahrenheit.

Now that your grill is preheated, you’re almost ready to start grilling your fish. The last thing to do is clean the cooking grates with a stainless-steel brush to remove all prior cooking debris that may still be left over.

Just a good rule of thumb, clean cooking grates are a necessity no matter what you are grilling to aid in easy removal of your grilled cuisine.

If you’ve experienced fish sticking to the grates in the past, chances are you didn’t preheat your grill to the correct grilling temperature, or clean your cooking grates properly.

GRILLING YOUR FISH WITH THE SKIN ON

Allow your fish to sit for 5-10 minutes to bring it up to room temperature before generously oiling and seasoning it prior to putting it on your cooking grates. This will help to eliminate the possibility of sticking.

If you want to sear the flesh side, first be sure to oil the flesh side of the fish and place it flesh side down directly on the grate and grill according to recipe. The fish will naturally release itself from the cooking grate once it is finished being grilled on that side. If swearing is not on your grilling game plan, simply place the fish skin side down directly on the grate.

Per inch of fish, the general rule is to allow 8-10 minutes of grill time. So, if your fish is two inches in thickness, grill each side for about six to eight minutes. But it’s always a good idea to check the instructions on your recipe.

When it comes time to take your fish off the grill, slide your spatula in between the area where the skin and flesh meet. Using a side-to-side motion, make your way between the two areas so that the layer of skin remains on the grate and only the flesh piece is removed from the grill.

As always, make sure you allow adequate time for your fish to rest after it is off the grill. 3-5 minutes is a sufficient amount of time to let the fish relax and allow for the juices to run back into your cut of fish, making it more tender.

GRILLING YOUR FISH WITH THE SKIN OFF

To help reduce the chances of the fish sticking to the grill, allow it to sit for 5-10 minutes to bring it up to room temperature. Then, using oil, generously coat both sides and add the seasoning of your choice to your fish before you place it on your cooking grates.

Be sure to stick with the general rule of thumb that allows for 8-10 minutes of grill time per inch of fish. Therefore, if your fish is an inch in thickness, grill each side for about three to four minutes. However, always be sure to consult the instructions on your recipe.

Only flip your piece of fish once while grilling. Do not repeatedly turn and flip it. This will heighten the chance of it breaking apart while being grilled.

When it comes time to flip your piece of fish, do not force your piece of fish off the grill. Be patient and allow your fish to naturally release itself from the cooking grate on each side. This will indicate that the fish is done being grilled.

As always, make sure you allow adequate time for your fish to rest after it is off the grill. 3-5 minutes is a sufficient amount of time to let the fish relax and allow for the juices to run back into your cut of fish, making it more tender.

Always remember to grill with your lid down. Each time you open the lid, you add additional cooking time to your meal.

]]>

Categories
General

What do you know about Lingcod in (2020)

General Description
Lingcod (Ophiodon elongatus) belongs to the family Hexagrammidae. Contrary to their name, they are not true cods, but are greenlings. Lingcod are voracious predators and can grow to weigh over 80 pounds (35 kg) and measure 60 inches (150 cm) in length. They are characterized by a large mouth with 18 sharp teeth. Their color is variable, usually with dark brown or copper blotches arranged in clusters.
Life History
Early Life History
Lingcod hatch in late winter or early spring. Newly hatched larvae are approximately ¼ to ½ inch (7–10 mm) and passively move with surface ocean currents. During this period, lingcod larvae grow rapidly feeding primarily on copepods and other small fish. By mid-summer, at lengths of about 3 inches (80 mm), the larval lingcod settle on the bottom in kelp or eelgrass beds and begin feeding on juvenile herring or other small fish. By age 2, the juvenile lingcod begins to use habitats similar to those used by adult lingcod, though in shallower water. Their diet begins to resemble that of adult lingcod.
Adult Life History
Size increases rapidly during the first years of life. Throughout this period, both sexes display similar growth patterns. However, by about age 4, female lingcod begin to grow faster than the males. The maximum age of lingcod reported is 25 years. The largest reported fish caught was 60 inches long (150 cm) and weighed 85 pounds (32 kg). Adult lingcod are voracious predators and eat almost anything, including other lingcod. Results of tagging studies have indicated the majority of lingcod are fairly sedentary and do not wander far from their home reef.
Reproduction
Male and female lingcod mature at different lengths and ages. Female lingcod begin to mature at 3 to 5 years of age at an average length of 24 to 30 inches. Males begin to mature at age 2 at a length of 20 inches. The number of eggs per mature female increases with both size and age. Along the Alaska coast, lingcod begin spawning in early December, with peak spawning occurring from mid-January to mid-March. During spawning, male and female lingcod gather along rocky reefs affected by wave action or strong tidal currents. After the eggs are deposited and fertilized in nests in crevices along the reefs, the female lingcod disperse to other areas and leave the male lingcod to guard the egg nests until the eggs hatch which takes from 5 to 11 weeks. Thus, while most egg masses hatch between mid-March and mid-May, some hatching occurs into June.
Natural Predators
Lingcod are most vulnerable to predation during the egg and larval life stages. Egg nests, if left unguarded, are generally decimated within 48 hours by rockfish, starfish, sculpins, kelp greenling, and cod. The presence of a male to guard the nest from these predators appears essential for successful spawning. Unfortunately, nest-guarding males are extremely aggressive and vulnerable to predation by seals, sea lions, and anglers. Removal of a male during the nest-guarding period not only results in removal of the fish from the adult spawning population but also results in the likely loss of that male’s nest, thereby affecting future recruitment. Larval and juvenile lingcod are preyed upon by fishes such as salmon, rockfish, and other lingcod.
Range and Habitat
Lingcod are only found on the west coast of North America. They can be found from the Alaska Peninsula/Aleutian Islands south to Baja California and are common throughout Southeast Alaska, the outer Kenai Peninsula, Kodiak, and Prince William Sound. While found to depths of 1,000 feet, lingcod typically inhabit nearshore rocky reefs from 30 to 330 feet.
Fast Facts

  • Size
  • Length to 60 inches, weight to 85 pounds
  • Lifespan
  • 25 years
  • Distribution
  • Only found on west coast of North America
  • Other Names
  • Cultus cod, blue cod, bluefish, green cod, buffalo cod, greenling, white cod
  • Remarks
  • Aggressive feeders

]]>

Categories
General

Adventures of a small house

Categories
General

Home landscaping design tips For Big Homes

well-maintained lawn and a clean home shows your love towards to the home and assures the buyers that you have taken a lot of care of your place. The design of the landscape should be sustainable and eco-friendly. Here are some tips for you that may help in designing your landscape in a better way and making it a little bit greener: Save water consumption: A lush green soft lawn is an amazing thing and it should not be out of the league. But require a lot of water on service leading to heavy water bills. In order to cut down the water bills, you can replace the grass with plants that are resistant to drought. Don’t over water the lawn. Use natural ways like recycling clippings of glass to reduce the need for chemical fertilizers and water. Promote Natural growth: Promote natural greening and healthy soil.Aerate the dirt around the grass and the plants. Select native plants that can thrive easily. Test your garden’s soil health to analyze what chemicals it is lacking. Compost to help reinvigorate the microbial life and the nutrients in the soil. Grow such plants in your landscape that welcome birds, bees and butterflies. Make your landscape valuable and productive: Grow food producing plants at home. They can help you live in a more sustainable manner. Build a portion of your landscape as a food garden. It will make your family eat healthily and save money. Foods lose nutrients with age, so the fresher the fruit and veggies, the more you’ll get out of them. They will also grow more safely and will be free from pesticides. Add something out of the nature: Add paths and seating to the landscape to improve the ambiance. Increase the beauty of your landscape by decorating it with outdoor furniture. Order of the plants matters: Unify the order of planting by repeating plants forms and textures. Catch the eye of the visitors by planting beautiful blooming flowers and perennials along the walkway. The planting bed size: The size of the bed you’re going to plant should be big enough to accommodate the desired fusion of plants. It’s a good practice to plant beds that are at least half of the width of the house. You can also plant beds in a way that they extend from the home to the roadway. Make the edges of the bed sharp to give a neat look. In fact, fill the landscape with most of the trees, shrubs, and bushes as it will save the maintenance cost. Uniformity: Maintain the order by limiting the species of plants, flowers, shrubs, and trees. Aim for three to five species of shrubs, five to ten species of flowers and not more than two to three types of trees. Although it’s also a good practice to keep adding the new species of plants and flowers to your landscape. Author Bio : Sarah works for Yourgreenpal and she loves gardens and lawns.]]>

Categories
General

How Often Should You Refinish Wood Floors?

If your home comes with beautiful wood floors, they’re going to remain a powerful asset whether you intend on selling or staying. Hardwood floors can drastically boost a home’s value, especially if they’re kept in great condition. Even if your wood floors end up suffering after a few years, refinishing hardwood floors can help perk up a tired, flawed, or damaged surface. But once you’ve had your floors refinished by N-Hance of Spokane, how long should you wait before doing a touch-up? Can you end up refinishing your floors too many times? Will excessive treatment end up hurting your floors rather than helping them stay in great condition? Luckily, your wood floors are durable and can withstand a lot of treatment. Still, it’s always good to know what’s best for your property in the long run. If you’re thinking about giving your hardwood floors another refinishing job, here’s what you should know.

You Can Refinish Your Floors Up to 6 Times

If you’re living in an older home or have seen your family take a huge toll on your hardwood floors in a short amount of time, you might want to think about refinishing your floors sooner rather than later. When it comes to refinishing, fortunately, you’ll be able to do the work about once every decade to keep your floors in amazing shape. While many homeowners don’t stay in the same home for upwards of 70 years, keeping your floors looking beautiful will definitely help boost your home’s value should you ever want or need to sell, and doing a quick, DIY refinishing job is way cheaper (and often more effective) than ripping up your beautiful old floors and starting from scratch. This goes double if your home has any sort of historical value. While the wood in an older home may not look great, chances are it’s extremely strong and durable. Older floors were made to last, so pulling up the boards should be a last resort. Your floors won’t suffer from over-refinishing as long as you’re sure to do it right. If you don’t trust yourself to do a good job on your own, put down the extra cash to hire a professional. You won’t regret it.

You Only Need to Do It Every 7 Years


If you’re worried about scuffing up your floors during the seven long years between refinishing jobs, don’t be. Refinishing your floors will effectively erase all the damage to your floorboards in just a few days’ work. When you refinish hardwood, you go through a process of sanding, buffing, and staining that will allow you to smooth out any imperfections or hard-to-clean stains on your floor. This means that short of a rotting or broken piece of wood, nothing is beyond fixing with a refinishing job. If you’re worried about taking better care of your floors in general, think about treating it with special cleaners (and cleaning more frequently) in the interim. Use a special wood cleaner like Murphy’s Wood Soap so your floor can retain its shine, and take care of scuff marks as they occur rather than waiting. That way, you won’t have to worry about preserving your floors after a fresh refinishing.

Using the Right Materials Will Help

Refinishing can be done at home using only a few household tools and a sanding machine, but make no mistake: It requires the right materials. While doing your own refinishing work shouldn’t end up costing you a ton of money, you shouldn’t skimp when it comes to purchasing the perfect wood stain or wax, especially if you’re refinishing outdoor wood floors that are bound to come in contact with water. The materials you use will work to seal your floor and protect it against rotting, warping, and moisture contact. That’s why you should always do your research before opting for the least expensive option. As with most home improvement jobs, looking into the best materials for the job is a key component of success.

You Can Repair Your Floor Without Refinishing It

If you’re dealing with floor issues and you’re not keen on the idea of doing a full-on refinishing job, try sanding down the specific area where you’re seeing damage. Sometimes it’s not necessary to do a huge home repair job in order to make your wood floors look their best. Try to clean your area by hand and treat it with the right cleaner to get any staining or dirt out. If you’re looking at physical damage, you can always replace a specific board without having to refinish or rip up the whole floor. Sanding a specific area can also help keep your floor looking even and fresh as long as you take the time to properly seal and buff the spot afterward.

]]>

Categories
General

Are Trickle Vents Really Necessary?

trickle vents are a perfect arrangement. What Are Trickle Vents? We comprehend that warm productivity is critical yet you should perceive that so is ventilation. You may scrutinize their motivation, the same number of individuals do, after all you have just put resources into protection to free yourselves of chilly air. In any case, trickle vents are intended to permit air, as the name recommends, to trickle into your home at a rate that goes unnoticed with no cool drafts. They are little openings which are coordinated into your window edge to permit air into the property without trading off the adequacy of your twofold coating, or in certainty the security of your home like an open window or entryway would. Building Regulations States That There Should Be Adequate Ventilation in Your Home Nonetheless, this doesn’t really point straightforwardly to the utilization of trickle vents. While we exceptionally suggest foundation ventilation, similar to trickle vents, which are intended to give controlled measures of ventilation to a safe and draft free condition, there are two different writes required in any building. Cleanse – The expulsion of intermittent poisons, for example, smoke and the scents from cooking, or maybe notwithstanding painting and designing, is alluded to as cleanse ventilation whereby a basic operable window or entryway will get the job done. Extraction – For rooms frequently presented to toxins, for example, the kitchen, or those where overabundance water vapor is apparent, for example, in your Bathroom, building directions recommend that lasting or irregular extraction is the response to restricting the spread of exhaust and contaminations. On the off chance that you are supplanting old windows with new twofold coating, it is imperative to note whether your unique windows include foundation ventilation. If so then you should try to incorporate trickle vents in to your new casings. Then again, if your old windows don’t have any type of ventilation, albeit achievable that they are not required by control, it may be worth considering sew in any case, particularly in rooms where wind current is essential.]]>

Categories
General

Experts in Electrical Equipment in Lethbridge

Experts in Electrical Equipment in Lethbridge If you are from Lethbridge, you will come across numerous reputable companies which supply, service and repair pumps, generators, Variable Frequency Drives and electric motors of all makes, models and types. They are staffed with some of the most qualified servicemen and technicians with unmatched skills in handling different kinds of equipment. If you need experts in pump repair or electric motors repair in Lethbridge, these experts can help. These companies usually deal with:

  1. Pump Sales, Repair and Servicing
These companies are renowned for supplying different types of quality pumps that are normally used by different clients across different industries. Whether you need a pump for moving water, oil, gas, or any other fluids or products, they can offer you one that will meet your needs. In addition, if your pump is damaged, inefficient or completely dysfunctional, you can call experts from these companies and they will get it fixed. Whether you need expert pump installation, maintenance or pump repair in Lethbridge, they can help.
  1. Electric Motor Sales, Repair and Maintenance
These companies are also renowned for supplying a wide range of electric motors with different capacities and at different price ranges. Moreover, their unique construction allows them to work in different high risk and dangerous environments. In addition, if your motor is not performing efficiently, the specialists at these companies can inspect it, perform various trouble shooting procedures and ensure that it is perfectly fixed. They can also provide scheduled as well as one-off maintenance. If you need topnotch electric motors repair in Lethbridge, these companies can help.
  1. Generator Sales, Repair and Servicing
If your home or business usually relies fully or partially on a generator to power all or some of its operations, you can count on these companies to supply you with a high performance and dependable generator that will reliably meet your power needs. They have some of the best generators that are sourced from renowned brands. Moreover, if your generator is faulty, you can trust them to provide you with unparalleled inspection, troubleshooting, repair and even servicing. Moreover, all of their products and services usually come with a warranty. Other products that are normally offered by these companies include Variable Frequency Drives, gear boxes, welders and plasma cutters, among many other products and related accessories. Having some of the best technicians in the industry, they always strive to ensure that their equipment is maintained in good condition. If you are looking for experts in electric motors repair or pump repair in Lethbridge, these companies have specialists that can handle different types of electrical equipment.]]>

Categories
General

How to Choose a Good Table Fan?

Table fans are not a thing of past. People still actively use them to combat hot summers or in addition to ceiling fans. The question remains how do you choose which table fan is right for you? Things that you should keep in mind before purchasing a table fan for yourself First of all, you should get acquainted with the types of table fan that are available out there. They are classified into two categories based on oscillation and design Based on Oscillation:

  1. There are oscillating fans that cover a large area.
  2. Some fans have a rotating front grill that circulate air in a cone.
Based on Design:
  1. You can get a box table fan that is very sleek and ideal for a window sill.
  2. Desktop fans are antique and give a nice vintage feel to your space.
  3. Tilt table fans have a frame than be tilted. They are good to use during winter and summer.
Now that you know the types of table fans that you can buy, look at the factors that you need to consider.
  1. Performance: Although table fans only cover a small area as compared to ceiling fans. You can choose an oscillating table fan that can cover a larger area if you are okay with intermittent air flow.
  2. Material: Choose a sturdy fan that is either made of high-grade plastic or metal. It will ensure that the fan serves you longer.
  3. Maintenance: The older fans do not have a removable grill and can get quite dirty if not cleaned properly. The newer models have removable grills which makes it really easy to clean and maintain.
  4. Look: Choose a fan that looks good and matches your interiors. You do not want a fan that takes away from the décor of the room. Fans nowadays are available in several different colours and sizes and designs. Select a fan that suits your personal taste be it modern or vintage.
  5. Portability: Ensure that the table fan is portable. This is a major plus over other kinds of fans such as ceiling fans or wall mounted fans. You should be able to take your fan anywhere in the house or even when you’re moving houses.
  6. Noise: Choose a bigger fan that is quieter than a small inefficient noisy one. Unless space or fan price is a constraint, then you can buy a smaller fan.
  7. Ergonomic design: Choose a fan that is really efficient at circulating cool air in the room. Check if the blades are ergonomically designed.
The best part of buying a table fan is that the fan price is really low compared to ceiling fan price. It is really an economical choice for people who do not want to spend on air conditioners or coolers. You can use the table fan along with ceiling fans to make the room cooler faster. In the hot summers, it is really important to keep the temperature down.    ]]>